HP-2000 | SH-3510
Transducer : HP-2000
High rigidity and durability transducer designed for large guillotine blades, punching tools, and custom-made tools
SH-3510 specification click here
Specifications：HP-2000
| Frequency | 20kHz |
|---|---|
| Cord length | Up to 10 m |
| Housing material | SUS303 / Resin (Duracon) |
| Weight | 1400g |
| Blade thickness | 1.0mm |
Applicable Materials
|
|
plate,sheet,film,and laminated material |
|---|---|
|
|
carbon fiber, fiberglass |
|
|
vulcanized latex, non-vulcanized latex, sheeting material, and tube |
Option
-
Option tool
Click here to download the dimensions and catalogs
Click here to apply for a test cut and Inquiries
Apply for test cut by fax
Apply for a test cutting by phone
Period of acceptance weekdays from 9:00 a.m. to 5:00 p.m.(Japan time)
Oscillator：SH-3510
Upgraded: Connection with PLC is now available
Factory improvement through DX/loT requires connection with various controllers and connection with PLC is now available besides the conventional relay control by ON/OFF switching. Standard installation of analog signal output for the load/amplitude and additional digital signals for each oscillation frequency/error type allow outputting more detailed data now.
Specifications：SH-3510
| Frequency adjustment | Automatic tracking type | |
|---|---|---|
| Maximum output | 500W | |
| Output adjustment | Step-less continuously variable type | |
| Power requirement | Single phase 200 VAC, 50/60 Hz |
|
| Power consumption | 1000VA | |
| Outer dimension (mm) | 300W × 400D × 200H | |
| Weight | 11kg | |
| Function | Detection of error cause | |
| External device connection function | Input | Oscillator ON/OFF, Amplitude adjustment. Error recovery |
| Output |
DC analog output. Frequency pulse output. Load threshold warning, Power supply status monitor,Error detection |
|
