Ultrasonic Hand-Tools Sonotec to Top
Maximizes the effect of high-speed, microscopic
ultrasonic vibrations in “cutting.”
Products
Ultrasonic cutter

SH-3510(Oscillator) SF-3110(Transducer)

Suitable for gate-cutting of resin-molded products
Oscillator:SH-3510
Oscillator:SH-3510
High-power Ultrasonic Cutter featuring Maximum Output of 500 W
The oscillator with a maximum power output of 500 W enabled powerful cutting of difficult-to-cut and extra-tough work pieces. Abrasion resistant carbide blade with 1 mm thickness can be used. Exchanging signals for on/off, emergency stop, change of output level, and other features with automated machinery or industrial robots is, of course, possible.
  • Cutter with a maximum power output of 500 W capable of handling materials requiring high-power cutting.
  • Tools including carbide blades and long blades can be used.
  • Mountable on automated machinery, industrial robots and plotters..
Specifications
Frequency adjustment   Automatic tracking type
Maximum output   500W
Output adjustment   Step-less continuously-
variable type
Power requirement   Single phase
200 VAC, 50/60 Hz
Power consumption   1000VA
Outer dimension (mm)   300W X 400D X 200H
Function   Detection of error cause
External device
connection function
  Oscillation ON/OFF,
Adjustment of ultrasonic output,
Warning of error stop. Recovery from error
Weight   10.2kg
Transducer:SF-3110
Transducer:SF-3110
The main body of the transducer consists of a cylindrical duralumin case that can be easily installed in automated machinery. The blade width can be selected according to its use. This cutter is ideal for up-and-down push cutting (guillotine system) and punching.

* The tool shown in the photograph is an example. Blades can be manufactured according to the shape of a work-piece.
SF-3110 Detail drawings(PDF)
Specification
Frequency   22kHz
Vibration element   PZT piezoelectric
transducer
Tool attachment screw   M8
Cord length   4m
(max. extension:10 m)
Weight   800g(excluding cord)
Applicable materials
Thermoplastic resin plate, sheet, film, and laminated material
Various types of prepreg (boron, Kevlar, polyethylene fibers, etc
Rubber 15t vulcanized latex, non-vulcanized latex, sheeting material, and tube
Attachment tool  none
  Option
FB-0231-6L
blade tool
 
Recommendation of our test cut(free)