TEL +81-44-877-8311TELPeriod of acceptance
weekdays from 9:00 a.m. to 5:00 p.m.(Japan time)


SONOFILE SF-5600(Discontinuation)

This product was discontinuation.Repair correspondence is possible.


  • Maximum ultrasonic output of 45 W
  • Clamp tool mode prevents heating of ceramic stones, etc
  • Simple 15 steps output.
  • Output is displayed on an LED bar.
  • A reliable DC 30 V, 35,000 rpm brush motor is installed
      *The SF-3500 and SF-9700 cannot be used at the same time.

Specifications: SF-5600

Frequency 25 kHz Automatic feedback
Maximum output 45W
Amplitude adjustment 15 steps
Power supply Single phase
100 VAC or 200 VAC, 50/60 Hz
Power consumption 200VA
Outer dimensions(mm) 162W×280D×210H
Weight 3.7Kg


Click here to download the catalogs

Click here to apply for a test cut and Inquiries

Apply for a test cutting by phone

TEL +81-44-877-8311

Period of acceptance weekdays from 9:00 a.m. to 5:00 p.m.(Japan time)

Small-sized transducer:SF-9700

Covers a diverse range of tools, from small to medium sized. This small handpiece is easy to use, comfortable grip and well-balanced weight with curly cord.

Specifications: SF-9700

Tool screw diameter M6(Comes with M4 conversion adapter)
Cord 2.5 m curly cord
Outer dimensions φ28 × 128L (mm)
Weight 130g

Motor handpiece:SF-3500

The handpiece can be used at low and high speeds from 2,000 to 35,000 min-1 with low noise and low vibration. Rotational speed can be adjusted at will with the foot controller.

Specifications: SF-3500

Input DC30V
Number of revolution MAX 35,000 min-1
Collet chuck φ3.0 (mm)
Cord 1.5m curly cable
Outer dimensions φ15 / φ 24.5×148.5L (mm)
Weight 190g

Standard Accessories Tools

  • Standard Accessories Tools: SF-9700

    ①Tool Clamp (For flat or cylindrical type)

    ②Ceramic Stone (Flat type)

    ③Ceramic Stone (Cylindrical type)

    ④Diamond File (Longitudinal type)

    ⑤Diamond Stone (Longitudinal type)

    ⑥Diamond File

    ⑦Diamond Stone


  • フットスイッチ

    Foot switch

  • Foot controller