Ultrasonic Hand-Tools Sonotec to Top
Maximizes the effect of high-speed, microscopic
ultrasonic vibrations in “cutting.”
Products
Ultrasonic cutter

SH-3510(Oscillator) HP-8110(Transducer)

Highly versatile cutter enables powerful cutting of extra-tough materials.
Oscillator:SH-3510
SH-3510
High-power Ultrasonic Cutter featuring Maximum Output of 500 W
The oscillator with a maximum power output of 500 W enabled powerful cutting of difficult-to-cut and extra-tough work pieces. Abrasion resistant carbide blade with 1 mm thickness can be used. Exchanging signals for on/off, emergency stop, change of output level, and other features with automated machinery or industrial robots is, of course, possible.
  • Cutter with a maximum power output of 500 W capable of handling materials requiring high-power cutting.
  • Tools including carbide blades and long blades can be used.
  • Mountable on automated machinery, industrial robots and plotters..
Specifications
Frequency adjustment   Automatic tracking type
Maximum output   500W
Output adjustment   Step-less continuously-
variable type
Power requirement   Single phase
200 VAC, 50/60 Hz
Power consumption   1000VA
Outer dimension (mm)   300W X 400D X 200H
Function   Detection of error cause
External device
connection function
  Oscillation ON/OFF,
Adjustment of ultrasonic output,
Warning of error stop. Recovery from error
Weight   10.2kg
Transducer: HP-8110
SF8500RR
The transducer is suitable for gate cutting of molded articles containing glass or carbon fibers, which are hard to cut or machine in the past.

* The tool shown in the photograph is an example. Blades can be manufactured according to the shape of a work-piece.
SF-8110 detail drawings(PDF)
Specification
Frequency   22kHz
Cord length   Up to 10 m
Housing material   SUS303
Weight   1,600 g (excluding the cord)
Blade thickness   The thickness depends on the specifications.
Applicable materials
Thermoplastic resin plate, sheet, film, and laminated material
Carbon prepregs carbon fibers(CFRP)
Composite material polyethylene fibers, molded articles containing carbon fibers and glass fibers(GFRP)
Rubber 20t vulcanized latex, non-vulcanized latex, sheeting material, and tube
Recommendation of our test cut(free)
Option トルクドライバー