Engraving
Oscillator：ST-360
This model can be used in combination with Circuit board repair
- Oscillation mode can be selected from 4 modes:Single（ ）, intermittent ( – – – or - - - - ) or continuous（—— ）
- Oscillation time of intermittent mode can be adjusted
- Wide range of line-up : rough scraping by combined tool and micropolishing by clamp tool can be performed
- Cooling-air equipment is adapted to the handpiece. Continuousoperation is possible by suppressing the heat
- Engraving as well as circuit board repair, archaeology work arepossible (next page)
Specifications: ST-360
| Frequency | 20–24kHz Automatic feedback |
|---|---|
| Maximum output | 45W |
| Amplitude adjustment | Continuous variable control |
| Power supply |
Single phase 100 VAC or 200 VAC, 50/60 Hz |
| Power consumption | 150VA |
| Outer dimensions(mm) | 130W×250D×260H |
| Weight | 2.6Kg |
Click here to download the catalogs
Click here to apply for a test cut and Inquiries
Apply for test cut by fax
Apply for a test cutting by phone
Period of acceptance weekdays from 9:00 a.m. to 5:00 p.m.(Japan time)
Small-sized transducer：HP-9706
Small type of tool can lessen a burden of operators.Well-fitted shape of transducer to hand.24-hour continuous operation is possible by supplying cooling air.
Specifications: HP-9706
| Tool screw diameter | M6 |
|---|---|
| Cord | 1.7m Curly cord |
| Outer dimensions | φ28 × 118L (mm) |
| Weight | 150ｇ |
| Note | Air cooling system |
Selective Accessories Tools
-
Multi-purpose Set
① SE-8851 ② SE-5845 ③ HR-2020 ④ TF-1000
⑤ TR-1000 ⑥ TB-3000 ⑦ MX-4010 ⑧ SC-4561
⑨ SC-4261
-
Chisel Engraving Set
① HR-2020 ② TB-3000 ③ TR-1000 ④ TF-1000
⑤ TG-1060 ⑥ TG-1090
-
Archaeological Set
① T89160-X2 ② HB-1004 ③ HR-2020 ④ B-21
⑤ B-11 ⑥ B-14 ⑦ B-15 ⑧ B-23
⑨ B-10 ⑩ CS-8120-X3 ⑪ CS-1568 ⑫ CS-1168
⑬ CS-8168
Standard Accessories
-
Foot switch
