|
Reduced resistance for a quicker,
cleaner cut! |
 |
High-power ultrasonic cutter with ultrasonic power output of 220W.
Remarkable oscillator consistency. The function includes command
of on/off, oscillations for emergency stop signal and reset, etc. The
high-speed (22,000 vibrations per second) ultrasonic vibrations of
the tool (blade) with microscopic amplitude of 30-60 micron greatly
reduce cutting resistance.
Select the one that best suits your application from the three
combinations available for the SF-3410.
Feature:
- Infinitive adjustment of power output between
minimum and maximum.
- Amplitude control circuit ensures stable vibration
amplitude at all times.
- Connection terminals are compatible with your
automatic operation system/plotting cutter.
- Equipped with overload-control relay and protection
circuit.
|
| Basic suits
|
Machine
Specification
| power
pack Frequency |
22KHz |
| Frequency adjustment |
Auto-tracking type |
| Output power |
220W max. |
| Output power adjustment |
Infinitive adjustment |
| Power
source |
AC200V(The one for 100V can be manufactured) |
| Power consumption |
500VA |
| Outside
dimension |
143W x 294D x 262H (mm)
（Exclusive of the handgrip : 212H） |
| Weight |
4.5 Kgs |
* 100 V version can also be manufactured.
* The transducer is designed for use with the oscillator SF-3410.
Select a transducer for your application and intended purpose.
Applicable materials
- Plastics (boards, sheets, films, laminated materials)
- A range of prepreg (single layer, multiple layers)
- Leather (Natural/Artificial)
- Products for food processing available
- Rubber (Vulcanized/Unvulcanized)
- Cloth/Fabric, Bonded textile
- Paper, Cardboard
|
| |
|
|
| 1st.
Step |
|
Select
Tools & Holders |
 |
|
- Tools come in two types: Brazed (one-piece) and Vice-gripping.
- A range of tool holders is available for the vice-grip
blade.
- Blades can be manufactured to best suit your application
(min 0.4mm).
- Compatible with off-the-shelf blades as well as our originals.
-
Try out our test cutting service (free
of charge Please feel free to contact
us!)
|
|
|
|
|
| 2nd.
Step |
|
Select handpieces
and transducers for SF- 3410 |
|
|
The ultrasonic cutter is used in combination with the oscillator
and hand piece, or the transducer.
The cutting tool (blade) is screwed onto either hand piece or
transducer.
Select the one that best suits your application from the following
combinations available for SF-3410. |
|
| Models |
Descriptions |
| Outside dimension : Φ 16/46 x 168L(mm) |
| weight : 800g |
|
- Bigger torque force with bigger amplitude .
- Accepts 8mm threaded tools only.
- Suitable for cutting of big gates or trimming of molded thermoplastic
materials by mounting on an automatic system.
- More..
|
| Outside dimension : Φ 11/42 x 160L(mm) |
| weight : 560g |
|
- Larger amplitude type.
- The maximum vibration amplitude of the blade is 60µmm,
or up to 50% greater than that of conventional models.
- More...
|
| Outside dimension : Φ 11/42 x 60L(mm) |
| weight : 560g |
|
- Large amplitude type.
- Comes with rotary connector.
- Cutting tool:
vice-grip blade. Centering function.
- The cutting tool that best meets your application can be selected
from a wide range in our stock
- More...
|
The standard length of connecting cords is 4m, though
it can be extended if needed.
|
   
 |
Tool
Chart 
