The ultrasonic cutter makes the pattern repair of printed circuit boards a fun experience.

“Split-V” is an ultrasonic cutter equipped with chisels of all shapes, ideal for repair work. All you have to do is to select the right cutting tool. Whether it be a quick rough-cut, single hairline cut where accuracy is of utmost importance, or a cut as thin as 10+µmm, this ultrasonic cutter is all you need. Just like the conventional carving knives, the cutter unfailingly splits off the target spot by cutting into the object from 2 different angles at once and removing the area in-between. Resist can be removed safely and speedily. Hard metal used for the tip of chisel ensures the tool’s long-lasting life.

Features

Cutting solder patterns, fixing solder bridges, removing resist An assortment of tools is available to match each job. Choose a carbide tool with an appropriately shaped tip for cutting in wide areas, or between solder lines, for repairing shorts (solder bridges) or trimming after mounting components. Use a ceramic tool for peeling away resist. Optimal power control When a load is placed on the tool, the new power control circuit automatically increases power output to the most efficient level. The handpiece can be used continuously for long periods without any heat build-up. Built for ease of use Just attach the tool and turn on the power. Verify the location, then lightly press the tool forward as though engraving the material. One pass and the cut will be perfectly done. Options By attaching a knife blade using the special holder, the tool can also be used for cutting