|
The effect of high-speed and microscopic ultrasonic
vibrations realizes a flexible use.
|
Ultrasonic vibrations can
be switched on/off
by the foot switch. |
High-frequency ultrasonic cutter with the tool's vibration frequency of
40 KHz, 40,000 waves/second, and an amplitude of 40 micron,
maximizing the effect of ultrasonic vibrations that are high-speed and
microscopic. A wide range of materials, including newly-developed
composite materials, rubber, and leather, can be cut freely with low
processing pressure, sharp cutting edge, and little dust.
Feature:
- Stable vibrations with the maximum amplitude of 40
micron ensure remarkable cutting performance.
- Workability-oriented hand piece that is light and easy
to hold (145g).
- New system! Simplified and secure installation of the
tool with special square-headed screw and wrench.
|
| Basic suit
|
Machine
Specification
| Frequency |
40 KHz |
| Frequency adjustment |
Automatic feedback system |
| Output power |
45 W max |
| Output power adjustment |
Continuous variable |
| Power source |
Single phase 100VAC, 50/60 Hz |
| Power consumption |
135 Watts |
| Outside dimension (mm) |
200W x 225D x 118 (mm) |
| Weight |
3.0 kg |
Applicable materials
- A range of prepreg (carbon, boron, Kevlar, fiberglass,
polyethylene fiber, etc.)
- Rubber (vulcanized latex, non-vulcanized latex, sheeting
material, sealing material, cube)
- Leather (natural/artificial)
- Thermoplastics (board, sheeting material, film, laminated
material, floor cover)
- Cloth/Fabric, Bonded textile, Paper (specially-treated paper,
coated paper), Aluminum/Beaten-copper
- Others: Send us a sample piece for free test cutting.
|
|
| 1st. Step |
|
Select Tools |
 |
|
-
Try out our test cutting service (free
of charge)
. Please feel free to contact
us!
|
|
|
|
| |
|
|
| 2nd.
Step |
|
Select
handpieces |
| 型名・形状 |
特徴・用途・仕様 |
|
|
Blade
thickness |
Sole use for 0.4mm
(The one for 0.5mm and 0.6mm can be manufactured.) |
| Cord length |
2m |
| Weight |
145g |
|
 *
Specifications are subject to change without notice due to continual
improvements.
Please confirm when placing your order. |
|
   
|
Tool
Chart 
