SF 60 Compact ultrasonic cutter

Product's Catalog	Ultrasonic Cutter Model List >> \| SF- 3441 \| SF- 3410 \| SF- 3400 \| SF 650 \| SF 651 \| SF 60 \|Tool Chart
	SF 60 Compact ultrasonic cutter

Catalog SF-60（309KB）

Ideal for fine work with a delicate touch!

Ultrasonic vibrations can
be switched on/off by the
foot switch.

Ultrasonic power output of 45W. Ideal for cutting, cutting-out, and window work of thin sheet materials as well as gate-cutting and deburring of small plastic parts. Just a light touch is all it takes to polish the work surface. Very little vibration is conveyed to the hand.

Feature:

SF-60 is a desktop-type ultrasonic cutter that is compact and lightweight.
Clean work surface is achieved by lightly touching with little vibration felt in the operator's hand.

基本セット

**Machine Specification**
power pack Frequency	25 KHz
Frequency adjustment	Auto-tracking type
Output power	45 W max.
Output power adjustment	Infinitive adjustment
Power source	AC100V(The one for 200V can be manufactured)
Power consumption	135 VA
Outside dimension	145W x 180D x 125H (mm)
Weight	1.9 Kg

1st. Step

Select Tools & Holders

Tools come in two types: Brazed (one-piece) and Vice-gripping.
A range of tool holders is available for the vice-grip blade.
Blades can be manufactured to best suit your application (min 0.4mm).
Compatible with off-the-shelf blades as well as our originals.
Try out our test cutting service (free of charge).
Please feel free to contact us!

Cutting blades

	Various vice-gripping blades

	One-piece blades

	Chisel blades

2nd. Step		Select handpieces and transducers for SF- 60


Designed to be used in combination with SF-60 transducer. High-frequency electric energy that the transducer generates is converted into mechanical vibrations of the same frequency, which conveys ultrasonic vibrations to the tool (blade) in a longitudinal direction. The cutting tool that best meets your application can be selected from a wide range in our stock. Special cutting tools can also be designed and manufactured. * The standard length of connecting cords is 4mm, though it can be extended if needed. * Specifications are subject to change without notice due to continual improvements.

Model

Specification

SF- 9400

For manual use

Vibration elementr	PZT piezoelectric transducer
Screw thread	M6
Cable Length	0.6-meter curled cord, extended to 2.5m
Housing material	Polyoxymethylene
Outer dimension	Φ 11.5/28 x 128L
Weight	130 g (w/o code)

SF- 6100

For machine mount use

SF- 6000

For machine mount use

F-6100 / SF-6000 (Interchangeable except for the connection end)

Vibration elementr	PZT piezoelectric transducer
Screw thread	M6
Cable Length	4m
Housing material	Polyoxymethylene (Duracon)
Outer dimension	Φ 11.5/28 x 128L
Weight	150g (Exclusive of the cord)

*	The cutting tool that best meets your application can be selected from a wide range in our stock. Special cutting tools can also be designed and manufactured.
*	The standard length of connecting cords is 4m, though it can be extended if needed.
*	Specifications are subject to change without notice due to continual improvements. Please confirm when placing your order.

* Specification, subject to development may be changed without notice.

Please feel free to contact us!

SF 60 Compact ultrasonic cutter

Select Tools & Holders

Select handpieces and transducers for SF- 60