The design maximizes the robot's working space and the forced air-cooling caused by equipping it with an air inlet makes a higher amplitude possible.
The SF-8541R is equipped with a rotary head. Not only is this a rotary connector of electrical signals, but also contains an air inlet that rotates simultaneously. Therefore, electrical cables and air tubes can be fixed no matter how many times the direction of the cutting blade of the plotter, etc. is rotated.
The oscillator SF-3441 for the SF-8541 and SF-8541R models is an ultrasonic controller that enables the devices, including automated machinery, robots and plotters, to exchange signals with the main unit, allowing them to switch on/off, make an emergency stop and reset.

ＳＦ－８５４１

• The cutting tool that best meets your application can be selected from a wide range in our stock. Special cutting tools can also be designed and manufactured.
• The standard length of connecting cords is 4mm, though it can be extended if needed.
• Specifications are subject to change without notice due to continual improvements.

Vice-gripping
FB 3136-6L more